1.You should try to avoid charging immediately after being exposed to high temperatures.
After a vehicle is exposed to high temperatures for a long time, the temperature of the power box will rise, causing the battery temperature to rise. In this case, if you charge immediately, it may accelerate the aging and damage of the wiring in the car, which may cause a fire.
2.Pay attention when charging during thunderstorms
When charging an electric vehicle on rainy days, if a lightning strike occurs, it is very likely to hit the charging line, which will generate huge current and voltage, causing damage to the battery and even greater losses.
When parking, try to choose a higher location. Check whether the fast charging station gun has been soaked by rain and whether there is accumulated water or debris in the gun. Wipe the inside of the gun head clean before use.
When pulling out the gun from the charging pile, be careful to prevent rainwater from splashing into the gun head, and be sure to keep the muzzle facing down when moving with the gun. When the charging gun is inserted into or unplugged from the car charging socket, be sure to use rain gear to cover it to prevent rainwater from splashing into the charging gun and the car charging socket. After the charging process is completed, pull out the charging gun from the car body, and immediately cover both covers of the charging port on the car body while pulling out the gun.
But you don’t have to worry too much. In order to ensure the charging safety of users, every charging pile company will take various harsh environments into consideration during the product design and manufacturing process, and provide safety protection.
3.When charging, do not do anything that will increase the internal charge load of the battery
For example, use the air conditioner in the car while charging.
For pure electric vehicles, when ev charging solutions in slow charging mode, you can use in-car electrical appliances, but this will consume power and cause the charging time to be extended again. Therefore, it is best not to use it unless necessary.
If a pure electric vehicle uses fast charging mode, it is best to prohibit the use of electrical appliances in the car at this time. Because the fast charging mode is achieved by increasing the current, if you use electrical appliances in the car at this time, it is likely that the electrical appliances will be damaged due to excessive current.
4.You should choose a charging pile that meets national standards for charging
Try to choose smart charging piles to prevent overcurrent, overcharge, and overheating inside the battery.
Microchip technology charging piles have sixteen major protections including overvoltage protection, undervoltage protection, overcurrent protection, short circuit protection, leakage protection, grounding protection, overtemperature protection, low temperature protection, and lightning protection to ensure the safety of the entire charging process.
5.Try to charge in a cool and ventilated place
Long-term exposure to the sun outdoors in summer will cause the temperature of the vehicle to rise, which will in turn cause the temperature of the power battery to rise. This is especially important for some pure electric vehicles without temperature management systems. During the public car charging stations process, the battery itself will generate heat. If the heat dissipation is not good, the temperature will rise sharply, affecting the charging status.
High temperature will accelerate the aging of the wiring in the car and bring potential dangers, so it is best to choose charging piles in underground parking lots or in cool places to help extend the life of the power battery.
1.https://www.cngreenscience.com/products/
2.https://www.cngreenscience.com/ac-ev-chargers/
3.https://www.cngreenscience.com/contact-us/
If want to know more about this, please feel free to contact us.
Tel: +86 19113245382 (whatsAPP, wechat)
Email: sale04@cngreenscience.com
Post time: Jul-21-2024
